Specialized News

  • Fair Hanoi technology and equipment in 2013 at 26 in the afternoon From 9/29, at the Sports Stadium ...
  • When you need to buy generators, you need to list in detail the electrical equipment to be used, which
  • Where ever you live regional power cut schedule? Today many people have started to ask each other giggle ...
  • FK Series

    Product Information

  • The level above the KG series, where combustion stability is critical, is the FK series, which were created by studying the KG line and re-engineering them from the start. With their high-power blowers they are suited to burners operating under heavy load, for example burners for furnaces with high-pressure interiors. Yet the improvements to this line are not only in the unit performance, but by working improved maintainability into the structure of the piping, disassembly for times such as inspection and maintenance is quite simplified. We ask that you make maintenance requests to us. A low-high control alternates between the pilot and main (the WEM type), and there is also the ability to switch between two levels of main flame (the WEM2 type). (A damper motor is used for both types.) For installations where space is tight, the unit has been designed compactly, and can be produced with its piping reversed (the R arrangement) when needed for even greater ease of placement. The units are ideally suited to installation to such fittings as duct hoses.
  • SPECIFICATIONS

    Model

    Output

    Power source

    Motor

    Gas piping

    Flame detector

    LPG
    13A
    FK-5
    58kW
    100/200V
    0.03kW
    15A
    15A
    F/UV
    FK-10
    116kW
    100/200V
    0.2kW
    20A
    20A
    F/UV
    FK-15
    174kW
    100/200V
    0.25kW
    20A
    20A
    F/UV
    FK-30
    349kW
    200V
    0.4kW
    32A
    32A
    F/UV
    FK-50
    581kW
    200V
    0.75kW
    40A
    40A
    F/UV
    • F: Flame rod
      UV: Ultravision
    • The power source for FK-5 is single-phase (1φ ) only.
    • The output for these models meets the listed value only when the supplied gas pressure for LPG is 2.8kPa and the pressure for 13A is 2.0kP.
    • The heat generation of gas is calculated with HHV (higher heating value).
    • The model number varies according to the gas used